Conditions générales de vente       Espace client       Contact      





649,00 € TTC


-The Inspired Hex Frame Kit - complete with both +20mm IS disc mount and 4-bolt rim brake mounts!
- Building on the success of the proven Inspired Hex frame, the frame kit features an updated version of the frame along with colour-matched Inspired Team fork and FSA Orbit Equipe sealed bearing headset.
- Butted 7005 aluminium tubing provides a good blend of strength to weight.
- Extensive testing with various riders including TRA world ensures the Hex offers a level of quality and performance that cannot be found in any other 26” street frame.
- Externally butted 1 1/8" headtube has tapered reinforcing rings, plus strength further improved by using external top and downtube gussets.
- One-piece 68mm wide bottom bracket and chainstay yoke offers excellent clearance for both the tyre and the chainring. Fits standard 1.37" x 24tpi threaded bottom brackets.
- The one-piece design also increases stiffness and strength at this important area while carefully designed pockets help reduce the weight.
- Custom seat and chainstay tubing help improve crank and heel clearance.
- Compact CNC machined dropouts and custom gear hanger keep the frame looking clean and stylish.
- Weld angles and contact areas at the dropouts have also been improved to help maximise strength.
- Dedicated 4-Bolt brake mounts spaced at 89mm, centre to centre across the mounts (maximum rim width approx 38mm, unless Tensile Offset Mounts are used).
- Thick +20mm positioned IS disc mount is supported by a large gusset that wraps around the seat stay.
- Supplied with a pre-installed FSA Orbit Equipe sealed bearing headset - a proven model found on the majority of Inspired's complete bikes!
- Inspired's forks are renowned for being some of the toughest forks on the market.
- Ultra thick one-piece CNC machined aluminium steerer tube (6mm wall thickness - 205mm length), this fork overcomes many issues previously seen when using a bonded 2 piece steerer.
- Steerer is extra thick at the bottom, more so than other forks which appear to be the same, ensuring maximum stiffness and strength.
- The steerer tube has a radius at the bottom to prevent cracking, therefore some models of crown race may not appear to seat fully. This is normal and does not cause any problems.
- Custom designed and manufactured disc brake mount (at the International Standard position) is extra long to prevent cracking at the top where it joins the leg.
- Super thick, large diameter fork legs provide additional strength.
- Unique, smooth welded and machined dropouts look classy and maximise durability without adding excessive weight.
- Advanced one piece top-cap/nut replaces the standard press-fit star fangled nut, top-cap and bolt featured on other forks.
- Disc mount only.
- Dropout size 9.5mm to fit all standard 9mm axles (Hope, Try-All, Shimano, Chris King, V!Z, Onza, etc.). Echo hubs use a 10mm axle and will need modification.
- Available in gloss blue with high quality graphics that are lacquered over.
- May not be supplied with hose clips.


- Frame, fork and headset: 3.168kg

Geometry (When measured with 410mm x 30mm fork, sold separately):
- Wheelbase: 1040mm 
- Chainstay: 385mm 
- BB Height: +20mm 
- Head Angle: 73° 
- Seat Post Diameter: 27.2mm 
- Seat Tube Length (centre to top): 270mm
- Centre of BB to Top Centre of Head Tube: 670mm

13 autres produits dans la même catégorie :


Aucun produit

Expédition 0,00 €
Total 0,00 €

Panier Commander Vider mon panier

Paiement sécurisé